Weeding machine, also known as lawn mower, lawn mower, lawn trimmer, etc., is a mechanical tool used for mowing lawns, vegetation, etc. It is composed of cutter head, engine, walking wheel, walking mechanism, blade, handrail, control Partial composition. The development of agricultural mechanization, improvement of work efficiency, and improvement of agricultural production efficiency are extremely important in a large agricultural country like ours. As an important tool in agricultural production, the lawn mower has the most direct impact on the yield of crops. Its invention is a major advancement in human civilization. In countries where the mechanization of animal husbandry is highly developed, the research on new verti cutter is developing in the direction of high speed and energy saving.
In the process of traditional agricultural production, weeding is a major task of field management. Common cultivation and management measures for removing weeds include plowing, cultivating, and hand-pulling. Although the emergence of herbicides has solved part of the problem of weeding, cultivating is still a necessary measure for field management, because the main purpose of cultivating is not only weeding, but also has many functions. For example, it can loosen topsoil, increase soil aeration, increase ground temperature, promote aerobic microbial activity and nutrient efficiency, promote root extension, and adjust soil moisture status.
Traditional cultivating uses manual cultivating methods. Although the accuracy is high, the work efficiency is low. Therefore, the emergence of some small Turf Comber helps farmers reduce the labor burden of cultivating. The following techniques should be paid attention to during the use of sod cutter. Better improve work efficiency and extend the service life of agricultural machinery.
Before weeding:
Before weeding, the debris in the weeding area should be removed to avoid damage to the cutting head and blades. To start the engine in a cold state, close the damper first, and then open the damper at an appropriate time after starting. If the turf area is too large, the continuous working time of the mower should not exceed 4 hours.
After weeding:
The Verticutter Machine should be thoroughly cleaned, especially the debris on the radiator must be carefully cleaned. The flying grass clippings adhere to the radiator and affect its heat dissipation function. In severe cases, it will cause the cylinder to pull and damage the engine. Check whether the blade is defective, whether the screws are fastened, and whether the vulnerable parts need to be repaired, so as to extend the service life of the agricultural machinery.
In addition, the backpack-type small lawn mower is generally suitable for weeds of 10-13 cm. If the weeds are too long, it is best to cut the upper half first, and then the lower half. In the process of using, open the throttle at medium speed and move forward at a constant speed, which can save fuel consumption and improve work efficiency.
Lawn mower maintenance
1. Maintenance of engine oil
Before each use of the lawn mower, check the oil level to see if it is between the upper and lower scales of the oil dipstick. The oil should be changed after the new machine is used for 5 hours, and the oil should be changed again after 10 hours of use, and then the oil should be changed regularly according to the requirements of the manual. The engine oil should be changed when the engine is in a warm state. Do not add too much engine oil, otherwise the lawn mower will have black smoke, insufficient power, excessive carbon deposits in the cylinder, small spark plug gaps, and engine overheating. The engine oil should not be too little, otherwise the lawn mower will experience loud engine gear noise, accelerated wear and damage of piston rings, and even cylinder pulling, which will cause serious damage to the engine.
2. Maintenance of air filter
Before and after each use, check whether the air filter is dirty and wash it frequently. If it is too dirty, the engine will be difficult to start, black smoke, and insufficient power. If the filter element is paper, you can remove the filter element and dust off the dust attached to it; if the filter element is spongy, it can be cleaned with gasoline, and some lubricating oil should be properly dropped on the filter element to keep the filter element moist. Conducive to the adsorption of dust.
3. Maintenance of radiator
The main function of the radiator is noise reduction and heat dissipation. When the lawn mower is working, the flying grass clippings will adhere to the radiator, affecting its heat dissipation function. In severe cases, it will cause the cylinder to be pulled and damage the engine. After the lawn mower, you must carefully clean up the debris on the radiator.
Finally, whether it is weeds, weeds, small shrubs or shrubs, professional users or home users, the Crep brush cutter can always meet your expectations. Our company’s brush cutter series products are complete, and there are many different specifications and models for the majority of home users and professional users to choose. The knapsack brush cutter works through the back frame, and the base adopts spring shock absorption, which has a better shock absorption effect and can effectively reduce the center of gravity of the machine. It is widely used in many operations such as grass harvesting, garden lawn trimming, highway, airport weeds, etc. It is especially suitable for operations between mountains and forests.
Post time: Jan-22-2024