一、 Repair of ball marks on the green must be timely
The correct method is to insert a knife or special repair tool into the edge of the dent, first pull the surrounding lawn into the dent area, and then drag the soil upward to make the dent surface higher than the pushing surface, and then press it flat with your hands or feet. Fairway: When hitting the ball on the fairway, you should put the cut turf back to its original position and flatten it with your shoes. If you can’t find the turf, put some sand in to fill the mark. Teeing table: The location of the tee mark can be changed frequently.
二、 Tool for repairing ball marks
Correct approach:
1. The repair tool is inserted from behind the ball mark.
2. Pull the surrounding lawn toward the center of the ball mark.
3. Use small force and repair gently.
4. This method is to pull the surrounding undamaged lawn to the center to provide quick repair.
Wrong approach
1. Pull out the lawn in the central damaged area. Doing so will delay its repair process.
2. After inserting the repair tool, rotate it. Doing so will only damage more of the turfgrass root system and loosen the turf.
三、Use handheld “plug-in” machinery
A handheld “push-in” machine operates directly over the ball spot to repair it. When the “plug” handle is pressed, the device hollows out the center of the ball mark and inserts six stainless steel blades into the turf immediately adjacent to the ball mark. While moving downward, the blade also moves from the edge of the ball mark to the center, pulling the healthy turf around the ball mark inward to fill it into the newly dug cavity in the center of the ball mark, forming a surface that can meet the requirements of sanding. , in preparation for spraying dry sand mixed repair materials. Advantages
1.Efficient repair Under ideal conditions, a green maintenance worker can repair 500 ball spots per hour using this equipment. The equipment’s efficiency in repairing ball spots is several times that of manual operation.
2.Keep the surrounding lawn root system intact. Since these turfs themselves have been hit by the ball, pulling the turf out will damage the root system and cause the death of the turf.
3.Both old and new ball marks can be repaired. Each time it is used, a new central area can be created, and the surrounding turf can be pulled into the damaged area for repair.
Post time: Jul-12-2024