1. Mowing timing: When the grass grows to 12 to 25 mm, mow it.Kashin lawn mower is our first choice.
2. Mowing height: If the grass grows too high, adjust the position to the highest position when mowing for the first time, and then mow again after two or three days. Do not mow more than 1/3 of the grass height at any one time.
3. Mowing width: Every time you mow the grass, cut it to a width of 75 to 100 mm. If the grass is taller or thinner, remow more and reduce the mowing width.
4. Blade running speed: The blade must run fast in order to cut the grass completely. Always use a full throttle when working to keep the engine at maximum speed. If the engine speed drops, the blade is bitten. The mowing should be narrower, the forward speed should be lower, or the mowing height should be increased.
5. Blade sharpness: A sharp knife cuts cleanly. Dull blades can easily tear the grass and cut it unevenly. When the blade cannot cut cleanly, it should be sharpened or replaced.
6. Hay: If the ground is too dry, a lot of dust will be produced during work. Too much dirt can clog the air filter and be detrimental to its performance. At this time, some water should be sprayed before mowing.
7. Wet grass: Wet grass will pinch the blades and clog the lawn reel mower. Be sure to wait for wet grass to dry before mowing.
For more lawn maintenance information, welcome your visit and consultation.
whatsapp: +15269639419
E-mail: sale@kashinturf.com
Web: www.kashinturf.com | www.kashinturfcare.com
Post time: Jul-08-2024